The primary motivation as to why people paint their interior walls is always to brighten up the look of the room. A fresh paint job can provide new life to a dull room. To generate a smooth finish you have to first take the time to prepare the walls. People like to cut some corners to avoid wasting time and money, but doing this can make your projects look bad.
Follow these steps for a smooth application:
The very first step is to make use of a paint scraper to get rid of all the old chipped paint. Scrape as much of the old paint off as you possibly can. Sand the chipped areas with a bit of sandpaper wrapped around a sanding block. Aim to smooth the sides as much as possible in order not to be noticeable under the new paint.
Wipe down the parts to be painted. Wash walls and woodwork to remove dust and grease from the surfaces. Grease will keep the paint from adhering to the surface properly and dirt or dust will attach itself onto your freshly painted wall. Wash with a weak soap and water solution and allow the area to dry before prepping.
Tape off the areas you do not want painted like baseboards and mouldings. Cover lighting fixtures and wall sockets, and put plastic sheets over furnishings to guard from drips. You will probably also choose to put plastic or an old sheet down on the carpet in to the area that you are painting. Paint rollers will sometimes slip and hit where you do not want them to.
Fill in any holes or cracks with putty and smooth out. Also fill in any holes left from where you scraped the old paint. If there is the least amount of an impression in the wall it will show through the paint as a very uneven spot so be sure you fill it as well. When you've filled in all the areas, smooth the puttied areas using a damp sponge and let it dry. When dry, sand the area with the sanding block to smooth out any rough edges left.
Choose a top quality brand name of paint. You don't have to pay a fortune on a gallon of paint, but you should buy a high quality product. Call around to some general contractors close to you and ask them what brand of paint they suggest. Once you've gotten a name you can call or visit some diy stores to try out and compare prices. This really is an important step because say you decided to pick a less expensive brand of paint it may well not cover as the area as well. Using a primer is an option, but it is not vital. The best brand of paint should cover in one coat. Sometimes you might will want a second coat to provide a more polished look.
A final tip: After your new paint has dried, check if there are any bubbled or uneven spots. In the event you see bubbles, lightly scrape the top, fill and retouch. You can purchase a small pot of the same colour paint for touch ups. If you aren't really a diy type, or you don't have the time for such a job you can hire a professional to do the job for you.
Interior painting is difficult work and by doing it yourself you may or may not pull off the results that you've been expecting. If you are planning to paint the exterior of your home then check out painter london first. There is certainly a lot of arranging to do, so you actually have to plan it carefully, otherwise you will finish up wasting the paint you have bought.
Article Source: http://EzineArticles.com/?expert=Bryon_Penird
No comments:
Post a Comment